Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the MAP Sensor on a Touran

Model: Volkswagen Touran 1T, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Crankshaft position sensor

See other generations:
Video tutorial

Learn how to replace the RPM sensor on a Volkswagen Touran. First, lift the front bonnet and secure it with the prop rod. Locate the crankshaft RPM sensor, and using a socket spanner, undo the securing bolts (if present next to the valve).

Disconnect the component from the engine housing. Compare the worn part with the new one, fit the new part using the respective securing bolts, and reconnect the crankshaft RPM sensor.

Start the vehicle and perform a functionality test. Use a suitable mini PC for the reset.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

Replacing the Steering Angle Sensor on the Volkswagen Touran
Replacing the Steering Angle Sensor on the Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Today's instructions will guide you through removing and replacing the steering angle sensor on the Volkswagen Touran. First, get into the vehicle an…
Replacing the camshaft position sensor on the Volkswagen Touran 1.6 TDI
Replacing the camshaft position sensor on the Volkswagen Touran 1.6 TDI
Volkswagen Touran (2003-2015 / 1T, MK 1) In this guide, we will provide instructions to remove and replace the camshaft position sensor on the Volkswagen Touran 1.6 TDI. First, open the engi…
How to Replace the Steering Angle Sensor on a Volkswagen Touran?
How to Replace the Steering Angle Sensor on a Volkswagen Touran?
Volkswagen Touran (2003-2015 / 1T, MK 1) To replace the steering angle sensor on a Volkswagen Touran, loosen the screws securing the airbag located at the centre of the steering wheel; these…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos