Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking the Engine Starting System

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Checks and maintenance

See other generations:
Video tutorial

Regular maintenance of the vehicle ensures a long life and prevents breakdowns. The checks that every driver can perform are very simple but important.

Checking the battery and the related starter motor circuit, especially during winter, is one of the most important operations for smooth starting. Start by checking the open-circuit voltage of the battery with a tester.

Connect the positive and negative probes of the device to the respective battery terminals. The correct voltage should be equal to or greater than 12.8V; if not, recharge the battery.

If the problem persists, it is necessary to replace it with a new one. Start the engine and check that the voltage is around 14V.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Location of the Fuse Box on Volkswagen Golf 7 with Diagram
Location of the Fuse Box on Volkswagen Golf 7 with Diagram
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The main fuse box is located behind the glove compartment on the driver's side of the dashboard. Open the glove compartment, squeeze the sides, and p…
How to deactivate the electronic traction control in the Volkswagen Golf?
How to deactivate the electronic traction control in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this tutorial, we can see how to disable the electronic traction control in the Volkswagen Golf, an extremely simple and quick operation to be per…
How to activate or deactivate the traction control of the Volkswagen Golf
Volkswagen Golf (2019-2026 / MK 8, Golf 8, Golf Viii) Today we will show you how to enable or disable the traction control system on a Volkswagen Golf model VIII, produced from 2019 to 2026. To enable or…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos