Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace a gear knob on the Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Gear Shift Knob
Operation: How to replace a gear knob on the Polo

How do you replace the knob on the Polo? Let's see the removal of the knob and the gearshift gaiter. With a plastic lever we disconnect the frame of the leather cap, we unhook the clamp of the knob. We take the knob in our hands and rotate it to the left and right until it is removed from the shift rod (we remove the boot). We take the new knob and insert it into the rod on the central tunnel, tighten the same in the rod together with the new leather cap. We test with the movement of the rod on the central tunnel the correct assembly of the knob. We check the correct assembly of the headphone frame.


Posted on 7 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What does the Volkswagen Polo coolant warning light mean? Read Answer
    • Polo 2001-2009 - How can I replace the gear knob on my Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos