Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Light Switch on a Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part: Checks and maintenance

Before you can start, sit in the driver's seat of your Volkswagen Jetta. Begin by pressing and holding the light switch. While doing this, rotate it clockwise. This will free the light switch itself. Proceed to extract the switch from its housing. At this point, disconnect the corresponding electrical connector by simply releasing the securing clip and pulling. Once you complete this last step, you can finally remove the switch, and you will have finished the disassembly.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Wiper Control Lever on a Volkswagen Jetta?
How to Remove the Wiper Control Lever on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial, see how to remove the wiper control lever on a Volkswagen Jetta. Before proceeding, as you will need to remove the airbag, disconne…
How to access the fuse boxes of the Volkswagen Jetta
How to access the fuse boxes of the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) In this brief guide, we will look at the information regarding the positioning and diagram of the fuse boxes in the Volkswagen Jetta. First, open the…
Where to find the fuse diagram in the Volkswagen Jetta?
Where to find the fuse diagram in the Volkswagen Jetta?
Volkswagen Jetta (2005-2010 / MK 5, A5) The fuse diagrams of the 2009 Volkswagen Jetta are available both in the technical documentation of the car and inside the cover of the fuse box. The…

Other guides you may be interested in

    Frequently Asked Questions

    • Jetta 1998-2005 - How many liters of automatic transmission oil does a Jetta A4 need? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos