Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb on a Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

This guide shows how to replace the reverse light bulb on a Volkswagen Tiguan. The reverse light on this vehicle is located in a recess of the rear bumper and replacing it requires some work.

The first step is to unscrew the fixing screws of the rear wheel arch; for easier access, you can remove the rear wheel. After moving the wheel arch to create enough space, detach the bumper by pulling it off section by section.

It is held in place by plastic clips at the top. The bulb can be removed by unscrewing the two hex screws on either side. Since the connector is in a hard-to-reach area, connect the connector before reattaching the new bulb.

At this point, you can reattach the bumper simply by pressing it back into place. Follow the steps in reverse to complete the replacement.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Replacing the Reverse Light Bulb on the Volkswagen Tiguan MK1
Replacing the Reverse Light Bulb on the Volkswagen Tiguan MK1
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this brief and simple guide, you will learn the steps to remove and replace the reverse light bulb on the first series Volkswagen Tiguan. First, u…
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today’s steps will show you how to remove and replace the reverse light bulb on the Volkswagen Tiguan, following the instructions below. First, move …
How to replace the reverse light bulb on the Volkswagen Tiguan
How to replace the reverse light bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In today's video, you will see the instructions that will allow you to dismantle and replace the reverse light bulbs on the Volkswagen Tiguan. To acc…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos