Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Engine Oil Level on a Volkswagen Polo

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Engine oil

Before you begin, open the front bonnet of your Volkswagen Polo. Start by pulling out the dipstick, which has a yellow ring on the top. Next, clean the dipstick thoroughly with a cloth and reinsert it fully into its housing. After that, pull it out again. This way, you can check the oil level using the MIN and MAX markings as a reference. Once you complete this step, you will know if the oil in the engine is sufficient.

Updated on 16 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to top up the power steering oil in a Volkswagen Polo
How to top up the power steering oil in a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Here are the steps to top up the power steering oil in a Volkswagen Polo. First, open the bonnet of your car and begin to remove the plastic cover si…
How to change the engine oil and filter of the Volkswagen Polo
How to change the engine oil and filter of the Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) On the Volkswagen Polo, the engine oil change and filter replacement takes place between the engine compartment and the underside of the car. The vid…
Engine Oil and Oil Filter Replacement on a Volkswagen Polo 1.2 TSI
Engine Oil and Oil Filter Replacement on a Volkswagen Polo 1.2 TSI
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this video tutorial, you will see how to replace the engine oil and oil filter on a Volkswagen Polo 1.2 TSI. First, open the bonnet and remove the…

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos