Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Volkswagen Caddy

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

Before you begin, open the rear tailgate of your Volkswagen Caddy. Start by unclipping and removing the cover of the screws that secure the rear light to its housing, then unscrew and remove the screws themselves.

Next, pull out the light unit and disconnect the electrical connector. This will give you access to the bulb holder.

Proceed to unscrew the screws that secure the bulb holder to the rear light. At this point, you will have access to the blown bulb, which you can unclip and remove, successfully completing the disassembly.

To fit the new bulb, follow these steps in reverse, and you will have completed the replacement.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb of the Volkswagen Caddy 4
How to Replace the Rear Light Bulb of the Volkswagen Caddy 4
Volkswagen Caddy (2020-2026 / SB) In this guide, you will learn how to replace the rear light bulb of your Volkswagen Caddy. This operation is quite simple, so just follow the describ…
How to Replace the Rear Headlamp Bulb on a Volkswagen Caddy?
How to Replace the Rear Headlamp Bulb on a Volkswagen Caddy?
Volkswagen Caddy (2003-2020 / 2K, MK 3) To replace the rear headlamp bulb on a Volkswagen Caddy, use a tool to lever off the plastic panel next to the corresponding headlamp. Once the cover…
Removing the Rear Light and Replacing Bulbs on a Volkswagen Caddy
Removing the Rear Light and Replacing Bulbs on a Volkswagen Caddy
Volkswagen Caddy (2020-2026 / SB) If you notice that one of the bulbs in the rear light of your Volkswagen Caddy has blown, it is advisable to replace it as soon as possible. To do th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos