Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the front seat of the Polo 6N2

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK III, Polo 3, MK 3, 6N, Polo III - Years 1994-2003
Part: Seat
Operation: How to remove the front seat of the Polo 6N2

Do we want to remove the seat of the Volkswagen Polo? We go inside the vehicle and see the disassembly of the pieces. We move the seat back and bring the seat up, then, with a socket wrench, unscrew the tightening screws placed on the front rail. After removing the screws at the top, we move the seat forward and remove the clamping screws from the rear of the track (we remove the plastic covers). We disconnect the power terminals of the front seat if there are any. We mount the seat above the rail and screw the clamping screws onto the sliding rails.


Posted on 12 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you remove the rear seats of the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How to remove the front seat from Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos