Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light and Replacing the Bulbs on the Volkswagen Caddy

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Tail light

In this video, you will find the instructions to remove the rear light and replace the bulbs on the Volkswagen Caddy, from 2004 to 2015. First, open both boot doors and start by unscrewing the two fixing screws located at the back of the light unit; then remove it by disconnecting the electrical connector of the bulbs. Next, unscrew the screws of the light cover and remove the bulb holder to access the bulbs; turn them to replace them with new ones, as shown in the video. Finally, reassemble everything!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Rear Headlamp Bulb on VW Caddy
Replace Rear Headlamp Bulb on VW Caddy
Volkswagen Caddy (2003-2020 / MK 3, 2K) Are the bulbs in the Volkswagen Caddy's headlamp due for replacement? Here’s how to change them. Open the boot lid, and remove the plastic cover over…
How to Replace the Bulb in the VW Caddy Headlamp
How to Replace the Bulb in the VW Caddy Headlamp
Volkswagen Caddy (2003-2020 / MK 3, 2K) How do you replace the bulb in the rear headlamp? Let's see how to remove the rear headlamp from the bodywork of the Caddy. Lift the tailgate of the …
How to Replace the Rear Light Bulb of the Volkswagen Caddy 4
How to Replace the Rear Light Bulb of the Volkswagen Caddy 4
Volkswagen Caddy (2020-2026 / SB) In this guide, you will learn how to replace the rear light bulb of your Volkswagen Caddy. This operation is quite simple, so just follow the describ…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos