Do it yourself
Frequently asked questions about cars and motorcycles

Dismantling wipers and motor for repair

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Windshield wipers

See other generations:
Video tutorial

Lift and remove the air intake grilles, then remove the plastic cover by levering with a screwdriver on the various plastic clips. You can now access the wiper mechanism.

Remove the plastic cover beneath the wiper arm. Disconnect the wiring connector from the motor. Using a ratchet spanner, remove the three nuts and unclip the fastener at the base of the arm. Remove the entire wiper mechanism assembly.

Lift the protective cover at the base of the wiper and remove the remaining covers. Proceed with the repair by replacing the broken original zamak support by dismantling the mechanical part of the arm movement.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this very simple video, you will learn how to remove and replace the front wipers on a Volkswagen Polo. First, lift the wipers and to remove them,…
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) Changing the wiper blades on your car is a maintenance task that is not very complicated to carry out. First, you will need to purchase new wiper bla…
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) If the wiper blades do not activate when the wiper control lever is engaged, the first thing to check is the integrity of the corresponding fuse, whi…

    Frequently Asked Questions

    • Polo 2009-2017 - Why won't the Volkswagen Polo wipers turn off? Read answer
    • Polo 2017-2025 - What is the fuse that regulates the wiper water on the Volkswagen Polo 2018? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos