Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Wiper Motor on VW Polo 6N

Model: Volkswagen Polo MK III, Polo III, Polo 3, MK 3, 6N - Years 1994-2003
Part: Windshield wipers

If the wiper blades do not activate when the wiper control lever is engaged, the first thing to check is the integrity of the corresponding fuse, which can be tested with a multimeter set to continuity mode: touching both ends of the fuse with the probes will cause the multimeter to emit a sound indicating continuity; it is also possible that the wiper motor has failed, which is located beneath the plastic cover just under the windscreen; to remove the cover, first unscrew the wiper arms, then remove the retaining clips that secure the plastic cover and proceed to remove the wiper motor mechanism, which also includes the motor.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Before you can start, exit the cabin of your Volkswagen Polo and head towards the rear wiper blade. Begin by lifting the support arm of the rear wipe…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this guide, learn how to remove and replace the front windscreen of the Volkswagen Polo, along with its seal. First, open the bonnet and start by …
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) In this video tutorial, you will learn how to remove the wiper arm of a first-generation Volkswagen Polo. First, open the engine bonnet: to remove th…

    Frequently Asked Questions

    • Polo 2009-2017 - Why won't the Volkswagen Polo wipers turn off? Read answer
    • Polo 2017-2025 - What is the fuse that regulates the wiper water on the Volkswagen Polo 2018? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos