Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

If the window regulator motor has been replaced, or if you have disconnected the battery or the battery has gone flat, there may be issues with the automatic operation. To reset it, insert the key to turn on the ignition; press and hold the window down button until the window is fully lowered, then continue to hold the button for 3 seconds.

Now perform the reverse operation by raising the window and keeping the button pressed for 3 seconds after it is fully raised. At this point, the reset will be complete and the automatic mode will be functioning again.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In today's video tutorial, you will see the guide that will allow you to dismantle and replace the window switches on a Volkswagen Golf, as well as t…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's instructions will illustrate the procedure for dismantling and replacing the window switches or switch panel on a Volkswagen Golf in simple s…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today, you will see in this video tutorial how to remove and replace the window switch panel of the Volkswagen Golf by following these simple and qui…

    Frequently Asked Questions

    • Golf 2012-2019 - What does the Volkswagen Golf error code P171900 indicate? Read answer
    • Golf 2008-2012 - What does the p171900 fault code indicate, in the Volkswagen Golf? Read answer
    • Golf 2019-2026 - How to reset the Volkswagen Golf Infotainment system? Read answer
    • Golf 2008-2012 - What does the fault code 00883 mean in the Volkswagen Golf? Read answer
    • Golf 2012-2019 - What does the Volkswagen Golf error P171900 mean? Read answer
    • Golf 2019-2026 - How to reset the Infotainment system in the Volkswagen Golf 8? Read answer
    • Golf 1997-2003 - What does the DSG error message on the Volkswagen Golf Mk4 mean? Read answer
    • Golf 2012-2019 - What to do when the brake pad warning light comes on on my Golf 7? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos