Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Pedal Switch on the Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

To replace the brake pedal switch on the Volkswagen Golf, open the bonnet and access the engine bay. Here, you will need to loosen the bolts securing the air filter box and completely remove it to access the underlying components. The switch is located at the rear of the engine bay, to the right of the engine block. To remove it, loosen its securing screws and disconnect the connectors: once the old switch is removed, you can insert a new one and reposition the air filter box.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The brake pedal switch is located just above the pedal lever and is secured with a bayonet fitting: to remove it, simply rotate it about ninety degre…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this tutorial, you will see how to replace the brake light switch in a Volkswagen Golf MK4, a very simple and quick operation. First, you will nee…
Volkswagen Golf (1974-1983 / Golf 1, MK 1) In this tutorial, we will see how to replace the brake light switch in the Volkswagen Golf, a very simple and quick operation. As shown, the switch i…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos