Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Switch in a Volkswagen Golf?

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to replace the brake light switch in a Volkswagen Golf MK4, a very simple and quick operation. First, you will need a Torx T20 key and, of course, a replacement switch.

Start by unscrewing the screws that secure the lower dashboard panel, then remove it and locate the switch, which is situated at the top of the brake pedal. To remove it, grasp the switch, turn it slightly counterclockwise, and pull it outwards.

Once done, disconnect the connector, attach it to the replacement, and secure it in place.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Light Switch on the Volkswagen Golf
How to Replace the Brake Light Switch on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This guide shows how to replace the rear brake light switch on the Volkswagen Golf. First, open the bonnet and start unscrewing the screws of the upp…
How to Replace the Brake Light Switch in the Volkswagen Golf?
How to Replace the Brake Light Switch in the Volkswagen Golf?
Volkswagen Golf (1974-1983 / Golf 1, MK 1) In this tutorial, we will see how to replace the brake light switch in the Volkswagen Golf, a very simple and quick operation. As shown, the switch i…
How to remove the third brake light of the Volkswagen Golf
How to remove the third brake light of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The following steps will show us how to disassemble and replace the third brake light and its bulbs on a Volkswagen Golf. First, move to the back and…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos