Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Switch in the Volkswagen Golf?

Model: Volkswagen Golf Golf 1, MK 1 - Years: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, we will see how to replace the brake light switch in the Volkswagen Golf, a very simple and quick operation. As shown, the switch is located exactly at the top of the brake pedal.

To remove it, first take off the panel containing the glove compartment located at the bottom of the dashboard, then disconnect the power connector, grasp the sensor, and separate it from the support by turning it slightly counterclockwise. Once done, you can position the replacement and follow the reverse procedure to reassemble everything.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Indicator Stalks on a Volkswagen Golf?
How to Replace the Indicator Stalks on a Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the indicator stalks on a Volkswagen Golf, you need to dismantle the airbag from the steering wheel and then the steering wheel itself. To…
How to replace the light switch on a Volkswagen Golf
How to replace the light switch on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide will show you the procedure for removing and replacing the light switch on a Volkswagen Golf. First, get into the vehicle on the driver's …
How to Remove the Headlight Switch on a Volkswagen Golf
How to Remove the Headlight Switch on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Briefly, here are the instructions to remove and replace the headlight switch on a Volkswagen Golf in simple steps. First, get in the vehicle and pul…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos