Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Coolant in a Volkswagen Polo 9N

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Checks and maintenance

Begin by opening and lifting the front bonnet of the Volkswagen Polo. Locate the coolant reservoir and unscrew the cap. Lift the car, then unscrew the tap located above the radiator hose at the bottom: allow the coolant to drain into a container. Flush the cooling system with appropriate fluid, continuing this process until the pipes and radiator are completely clean. Tighten the tap on the hoses. Prepare to top up with new coolant. Test the operation of the radiator and components.

Updated on 2 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this video tutorial, you will learn how to replace the radiator fluid in a Volkswagen Polo, as well as other models from the manufacturer. First, …
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this video tutorial, learn how to remove and replace the coolant radiator on a Volkswagen Polo 9N. First, lift the vehicle and remove the front wh…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) This guide outlines the main steps to remove and replace the internal heating radiator on the Volkswagen Polo 9N and 9N2. First, access the driver's …

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos