Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How do you replace the heater radiator on the Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK IV, Polo IV, 9N, MK 4 - Years 2001-2009
Part: Radiator
Operation: How do you replace the heater radiator on the Volkswagen Polo?

The heating radiator of the Volkswagen Polo is located on the inside of the dashboard, therefore to access it it will be necessary to completely disassemble the latter. To remove the radiator, it will first be necessary to remove the steering, by unscrewing the screws which fix the central airbag and then by removing the central nut which fixes it to the column. Then you can proceed by removing the central panel and the glovebox from the passenger side; at this point the passenger compartment heating radiator will be visible and can be removed by unscrewing the screws and disconnecting the pipes.


Posted on 13 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos