Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Heater Fan from a Volkswagen Passat B6 B7

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the cabin heater fan from a Volkswagen Passat B6 and B7. First, access the inside of the car and remove the lower panel located under the glove compartment; then open the glove compartment and unscrew the Torx screws present on it. Once removed, you can access the cabin fan, where you will unscrew the fixing screws and disconnect the electrical connector; simply replace it with the new one and reassemble everything by applying the reverse procedure!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Heater Radiator from a Volkswagen Passat
How to Remove the Cabin Heater Radiator from a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Before you can start, open the front bonnet of your Volkswagen Passat. Begin by unclipping and removing the air filter hose. This will give you acces…
Replacing the Cabin Heater Radiator on a Volkswagen Passat
Replacing the Cabin Heater Radiator on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Follow these simple instructions to remove and replace the cabin heater radiator on the Volkswagen Passat. First, raise the vehicle and disconnect th…
Removing the Heating Radiator from a Volkswagen Passat B6
Removing the Heating Radiator from a Volkswagen Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) In this video, learn how to remove the heating radiator from a Volkswagen Passat B6 by following these instructions. First, access the front and remo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos