Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : Disassembly and replacement of the Volkswagen Polo coil 1.4

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Coil
Operation: Disassembly and replacement of the Volkswagen Polo coil 1.4

Let's see in this short and simple guide the steps on how to disassemble and replace the current coil of the Volkswagen Polo, with 1.4 petrol engine. First of all, we open the bonnet and go to identify the non-working coil with a tester, first removing the upper plastic engine protection; then we disconnect the electrical connector of the coil, which we find above the cylinder head cover, in order to remove it and replace it with the new one. At this point we mount the new coil and check the operation of the motor, following the video tutorial to the end!


Posted on 10 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos