|
Do it yourself
| |||
| ||||
Replacing the Silencer Tailpipe
Model: Volkswagen Passat
3BG, B5
- Years:
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
This video shows how to replace the silenced exhaust tailpipe. First, locate the nuts to be removed and apply penetrating spray lubricant to them to facilitate their removal. Once removed, extract the connector that joins the tailpipe to the rest of the exhaust. To ease extraction, widen the part of the tailpipe that is connected to the rest of the exhaust using the appropriate tools. Before installing the new exhaust tailpipe, clean and lubricate the section of exhaust that will fit into the new tailpipe. Once the new piece is installed, reassemble everything.
Updated on 10 February 2026 by ScegliAuto
Related tutorials
Volkswagen Passat
(1996-2005 /
3BG, B5)
To inspect the differential, you need to lift the vehicle. One solution is to drive the front wheels onto special car ramps and then lift the rear by…
Volkswagen Passat
(2005-2010 /
B6, 3C)
In this guide, we will see the useful information for disassembling and replacing the timing belt of the Volkswagen Passat 2.0 TFSI; the manufacturer…
Volkswagen Passat
(2005-2010 /
B6, 3C)
Below we will discover the steps and procedure for disassembling and replacing the instrument cluster of the dashboard of the Volkswagen Passat. Firs…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Guide to replacing the 12V battery on the Toyota Yaris Cross
Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |