Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan

Model: Volkswagen Bora MK 6 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Blower motor

See other generations:
This video is currently unavailable

The following guide shows how to replace the cabin fan. Remove the lower part of the steering column, take out the safety clip and the universal joint screw, and free it from the steering. The column must also be freed while maintaining the steering wheel position.

Disconnect the electrical connector of the blower, then remove the blower by unscrewing the screws and rotating it clockwise. Next, remove the fuse cover and disconnect all electrical connectors, releasing the connector panel downwards.

You can now remove the blower and proceed to attach the new blower, which must be secured by rotating it counterclockwise.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Volkswagen Bora (1998-2005 / MK 6) The cabin air filter is located outside the cabin, just under the windscreen, on the passenger side; unscrew the fixing screws of the plastic cover, …
Replacing the Cabin Air Filter
Volkswagen Bora (1998-2005 / MK 6) The cabin air filter is located in the engine compartment, on the passenger side, just below the windscreen. Remove the seal and unscrew the fastenin…
How to Locate the Fuse Boxes and Understand the Schematics in a Volkswagen Golf IV Bora
Volkswagen Bora (1998-2005 / MK 6) This video shows how to locate the fuse boxes in a Volkswagen Golf IV Bora. The first fuse box is found in the passenger compartment, directly behind…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos