Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator Bulb on a Volkswagen Golf 7

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side marker bulb

See other generations:
Video tutorial

Before learning how to correctly replace the front indicator bulb on your Volkswagen Golf, it is advisable for safety to disconnect the car battery and wear rubber gloves. Once you have taken the necessary precautions, fully lift the bonnet and remove the rubber protective cap located inside the engine compartment corresponding to the headlamp containing the bulb to be replaced.

Next, disconnect the electrical connector, pull out the bulb and replace it with a new one. Finally, reconnect the connector and reposition the protective cap.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Indicator Bulb of the Volkswagen Golf
Replacing the Front Indicator Bulb of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In today's video, learn how to remove and replace the front indicator bulb of the Volkswagen Golf by following these simple and quick steps. First, o…
How do you replace the front turn signal bulb of the Volkswagen Golf?
How do you replace the front turn signal bulb of the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the front turn signal bulb of the Volkswagen Golf, you need to loosen the screws that secure the inner lining of the wheel arch correspond…
How to Replace the Front Side Indicator Bulb on a Volkswagen Golf
How to Replace the Front Side Indicator Bulb on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the front side indicator bulb on a Volkswagen Golf VII, open the vehicle's bonnet and locate the indicator assembly on the front wheel arc…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos