Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Seat Disassembly Instructions and Seatbelt Hook Replacement

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Seat

See other generations:
Video tutorial

To replace the seatbelt anchor support fixed laterally to the seat on the side of the centre tunnel, it is necessary to disassemble the seat to access the fixing pin of the support bracket. Start by removing the plastic cover on the seat's sliding rails; then undo the securing nuts located at the front of the seat, near the lever that allows adjustment.

At this point, disengage the lever and slide the seat backwards until it is removed from the rails (take care with the airbag cable). You can now undo the fixing pin of the seatbelt anchor bracket and replace it. Proceed in reverse for reassembly.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

How to Replace the Seatbelt on a Volkswagen Golf
How to Replace the Seatbelt on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's guide shows how to remove and replace the seatbelt on a Volkswagen Golf, following the instructions below. First, remove the side pillar to a…
How to Remove the Seat Belt from the Volkswagen Golf
How to Remove the Seat Belt from the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's guide will show you the procedure for removing and replacing the seat belt from the Volkswagen Golf in simple steps. First, open the front an…
How to Replace the Seatbelt of the Volkswagen Golf
How to Replace the Seatbelt of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The instructions in this guide will show you how to remove and replace the driver's side seatbelt of the Volkswagen Golf. First, open the front door …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos