Do it yourself
Frequently asked questions about cars and motorcycles

Stabiliser Bar Link Replacement

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Anti-roll bar

See other generations:
Video tutorial

Removing and replacing the links connecting the suspension wishbone to the stabiliser bar is extremely simple: the only detail is to hold the ball joint axis with an 8 mm hex key to unscrew the fixing nut. Once the old link is removed, fit the new one and proceed in the same manner for securing it. It is advisable to replace both links since if one is already completely damaged, the other will soon fail due to the stresses it is subjected to.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let’s see how to remove the steering knuckle on a Volkswagen Golf 5 Series. Position your car on a column lift, raising it to a comfortable height to…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) If the rubber damper of the wishbone suspension has failed, it is often possible to purchase just the bush from the aftermarket rather than the entir…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Do you want to remove the glow plug from a Golf? Open the front bonnet and see how to replace the damaged glow plugs. Remove the soundproofing panel …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos