Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Roof Handle on a Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Handle

See other generations:
Video tutorial

In this video, we will see how to easily remove the roof handle on a Volkswagen Tiguan. First, gather the tools you need: a small flat screwdriver and a Torx 2 key to remove the screws holding the handle in place.

Proceed as follows: open the door, sit in the seat where you want to remove the handle. At this point, lower the handle with one hand, take the flat screwdriver, and lower the clips covering the screws.

Take the Torx 20 key and unscrew these two screws. Once these steps are completed, pry to remove the handle and finally pull it to detach it from its housing.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Removing the Door Handle on a VW Tiguan
Removing the Door Handle on a VW Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Is the handle on your Volkswagen Tiguan damaged? Here’s how to remove the door handle. Insert a suitable metal key into the slot above the door (side…
How to Remove the External Door Handle on a Volkswagen Tiguan
How to Remove the External Door Handle on a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Before you start, open the door of your Volkswagen Tiguan. Begin by disengaging and removing the screw cover that secures the handle located on the i…
Disassembly of the exterior door handle of the Volkswagen Tiguan
Disassembly of the exterior door handle of the Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Today's instructions will allow us to disassemble and replace the outer handle of the door of the Volkswagen Tiguan. First, we open the front door an…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos