Do it yourself
| ||||
|
Volkswagen Taigun - Video tutorial
Model: Volkswagen Taigun
MK 1
- Years 2021-2024 In today's video tutorial we will see the main instructions that will allow us to disassemble and replace the horn or the horn of the Volkswagen Taigun. First of all we open the bonnet of our car and we begin to disassemble our front bumper; to do this we unscrew all the fixing screws located on the upper and lower part of the bumper, also removing those found on both sides of the front wheel arches. At this point we find our horn, positioned on the front of the radiator; unscrew the screws and disconnect the electrical connector to remove it and replace it with the new one!
Posted on 18 May 2024 by ScegliAuto
This video is currently unavailable
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |