Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Volkswagen Nivus

Model: Volkswagen Amarok MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

If you intend to replace the battery on this model of car yourself, you can find instructions on how to proceed in this description and also refer to the video. After opening the bonnet, locate the battery on the left side of the compartment, then proceed to disconnect the negative terminal first, followed by the positive terminal, and remove the fuse box located above.

Next, extract the battery and position the new one, then reconnect the positive terminal first, followed by the negative terminal, and reposition the pre-fuse plate.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Resetting the Engine Oil Change Light on the Volkswagen Amarok
Resetting the Engine Oil Change Light on the Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) In this guide, we will discover the instructions that will allow us to reset the engine oil change light (service) on the Volkswagen Amarok. First, g…
How to change the taillight bulb of a Volkswagen Amarok
How to change the taillight bulb of a Volkswagen Amarok
Volkswagen Amarok (2010-2021 / MK 1) In this video we see how to change the rear headlight bulb of a Volkswagen Amarok: we need to lower the rear side of the pick-up truck, in order to d…
How to Reset the Service Light on the Volkswagen Amarok 2?
How to Reset the Service Light on the Volkswagen Amarok 2?
Volkswagen Amarok (2022-2026 / MK 2) To correctly perform the manual reset of the service light on your second-generation Volkswagen Amarok, follow the steps described in this new guide.…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos