Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the rear light bulb on Volkswagen Polo 6R

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: Rear light bulb
Operation: How to replace the rear light bulb on Volkswagen Polo 6R

In the following guide dedicated to the world of Volkswagen Polo 6R we will find out how to correctly and in total autonomy the replacement of the rear light bulb. Before proceeding, make sure you have completely shut down the car and parked it safely. Then go to the rear of the car and raise the hood. Remove the panel located in the side area and proceed with the release of the headlight in question. At this point, go back out, pull the headlight slightly towards you and unclip the entire bulb holder. At this point you just have to replace the faulty bulb and, finally, reassemble all the various components.


Posted on 2 June 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos