Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Light Units on a Volkswagen Golf 6?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

In this video, you will see how to remove the front lights of the sixth series Volkswagen Golf. Get a Torx screwdriver ready. This operation is necessary to install the full LED light units.

Start by opening the bonnet and then remove the plastic cover. Now, remove the front bumper, both from the internal screws and those behind the wheel arch.

Disconnect the battery, first the negative terminal and then the positive, and proceed to disconnect the power supply to the front lights. Now replace the light units following the manufacturer's instructions and then reverse the operations.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Adjust the Height of the Front Headlights on a Volkswagen Golf
How to Adjust the Height of the Front Headlights on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This short and simple guide will show you how to adjust the height of the front headlights on a Volkswagen Golf. First, position yourself in front of…
How to Install Black Headlights on the Volkswagen Golf Mk VII
How to Install Black Headlights on the Volkswagen Golf Mk VII
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The front headlights you see in this video are from the Volkswagen Golf Mk VII and feature a black background; they are the famous Angel Eyes, which …
Replacing the Heating Radiator on a Volkswagen Golf
Replacing the Heating Radiator on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To access the car's climate radiator, follow the instructions below and also refer to the video tutorial (this is quite a complex job). First, remove…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos