Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Seat Bulb on the Volkswagen Scirocco R

Model: Volkswagen Scirocco MK 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Interior dome light bulb

Video tutorial

This guide shows how to replace the bulb in the rear passenger compartment of the Volkswagen Scirocco R. The first step is to remove the bulb housing using a trim tool; disconnect the electrical connector before proceeding with the replacement. Open the protective cover of the bulb and remove it by sliding it out of the holder.

Take the new bulb, and this procedure also applies to LED bulbs, install it by aligning the connectors with the conductive strips in the holder. Refit the protective cover of the bulb, the connector, and secure the holder in position.

Check that it functions correctly.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Volkswagen Scirocco
How to Replace the Front Headlamp Bulb on a Volkswagen Scirocco
Volkswagen Scirocco (2008-2017 / MK 3) In this guide, you will learn how to replace the front headlamp bulb on your Volkswagen Scirocco Mk3. Before starting the procedure, ensure the vehic…
How to Remove the Interior Light Bulb on the Volkswagen Scirocco
How to Remove the Interior Light Bulb on the Volkswagen Scirocco
Volkswagen Scirocco (2008-2017 / MK 3) The instructions in this guide will show you how to remove and replace the interior light bulb on the Volkswagen Scirocco. First, get inside the vehi…
How to replace the license plate bulbs of the Volkswagen Scirocco
How to replace the license plate bulbs of the Volkswagen Scirocco
Volkswagen Scirocco (2008-2017 / MK 3) Following these simple steps, we will see how to disassemble and replace the license plate lighting bulbs of the Volkswagen Scirocco. First, move to …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos