Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Brake Wear Light on a Volkswagen Golf 7?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

If the brake wear light on your Volkswagen Golf 7 remains illuminated after replacing the pads, the only way to turn it off is to disable the brake wear sensor. To do this, remove the corresponding wheel by unscrewing the wheel bolts.

Once the wheel is removed, disconnect the connector attached to the brake wear sensor. This will cause the warning light for the pad wear to disappear from the dashboard; finally, refit the wheel and secure it with the appropriate bolts.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today, you will learn the main cause of brake system failure, which triggers the brake warning light on the Volkswagen Golf. The brake light illumina…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To understand how the brake wear sensor works, the video first shows that disconnecting the sensor plug opens the circuit, causing the yellow warning…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you can see how to reset the airbag light on the Golf 5 by following simple steps that will guide you to proper vehicle manag…

    Frequently Asked Questions

    • Golf 2012-2019 - What does the Volkswagen Golf error code P171900 indicate? Read answer
    • Golf 2008-2012 - What does the p171900 fault code indicate, in the Volkswagen Golf? Read answer
    • Golf 2019-2026 - How to reset the Volkswagen Golf Infotainment system? Read answer
    • Golf 2008-2012 - What does the fault code 00883 mean in the Volkswagen Golf? Read answer
    • Golf 2012-2019 - What does the Volkswagen Golf error P171900 mean? Read answer
    • Golf 2019-2026 - How to reset the Infotainment system in the Volkswagen Golf 8? Read answer
    • Golf 1997-2003 - What does the DSG error message on the Volkswagen Golf Mk4 mean? Read answer
    • Golf 2012-2019 - What to do when the brake pad warning light comes on on my Golf 7? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos