Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Driver's Seat of the Volkswagen Polo Mk5

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Seat

See other generations:
Video tutorial

This guide shows how to adjust the driver's seat of the Volkswagen Polo Mk5. The controls are located on the outer side of the seat and at the front lower part. The first lever on the side of the seat allows height adjustment relative to the vehicle floor; pulling it upwards raises the seat and vice versa.

At the end of the seat, where it joins the backrest, there is a gear wheel that allows adjustment of the backrest angle; turning it towards the front of the vehicle tilts the backrest forward. At the front, in the right corner of the seat, there is a lever that allows adjustment of the seat distance from the pedals and steering wheel; keep it pulled up to release the slide.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before starting, sit in the driver's seat of your Volkswagen Polo. Press and hold the button located below the right side of the multifunction displa…
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this tutorial, you will learn how to adjust the front headlights on a Volkswagen Polo. This is an extremely simple operation; just select the desi…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos