Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote and Battery of the Volkswagen Golf 6

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Key

To change the battery of the remote for the Volkswagen Golf 6, use a small flathead screwdriver to pry open the key's housing. Remove the cover beneath the VW emblem; once the cover is off, you'll find the battery. Use the small flathead screwdriver to pry from underneath the battery to remove it. In the video, you also need to change the key shells, but if you only need to replace the battery, insert the new one in place of the old and close the cover. To change the key shells, use a pair of expanding pliers; insert them into the key housing and expand until the shells detach. Use a small flathead screwdriver to remove the circuit board, then open the new key using the same method as the old one. Insert the circuit board into the new key in the marked position, place the key with the spring into the shell, close the shells, replace the battery, and close the battery cover. Finally, test the new key and remove the protective film from the VW emblem.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To replace the battery in the key fob of a Volkswagen Golf, lift the emergency key by pressing the button located at the top of the fob. Once the key…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The following steps will guide you through removing and replacing the battery in the remote key of the Volkswagen Golf. First, take your remote contr…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To open the Volkswagen Golf remote and replace the battery, press the button that allows the key blade to pop out of its housing. Once the key blade …

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos