Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Inspection Light on a Volkswagen Polo Mk5

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Service warning light

This guide shows how to clear the inspection message on a Volkswagen Polo Mk5. To reset the maintenance indicator light on the total mileage display, use the ignition key and the reset button on the trip meter. While holding down the reset button for the trip meter, turn on the ignition and wait ten seconds. At this point, turn the pin to the right to reset the light. Turn the ignition off and on a few times to check that the light has reset correctly.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Inspection Light on the 2017 Volkswagen Polo
How to Reset the Inspection Light on the 2017 Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To reset the inspection light on the Volkswagen Polo, get in the vehicle, close all four doors, and turn on the ignition without starting the engine.…
How to Reset the Inspection Light (Service) on a Volkswagen Polo
How to Reset the Inspection Light (Service) on a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Today’s procedure will allow you to reset the inspection light (service) on a Volkswagen Polo. First, get into the vehicle and press and hold the res…
Resetting the inspection/maintenance service light of the Volkswagen Polo
Resetting the inspection/maintenance service light of the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) After carrying out the regular maintenance check, it is necessary to reset the service indicator light; let's see how to do it on the Volkswagen Polo…

    Frequently Asked Questions

    • Polo 2009-2017 - What to do when the oil light comes on on Volkswagen Polo? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos