Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Virtus Polo Sedan
  6. : How to reset the service warning light in a Volkswagen Virtus Polo Sedan

Volkswagen Virtus Polo Sedan - Video tutorial

Model: Volkswagen Virtus Polo Sedan MK 1 - Years 2018-2024
Part: -board computer
Operation: How to reset the service warning light in a Volkswagen Virtus Polo Sedan

In this video tutorial we can see how it is possible to reset the service warning light in a Volkswagen Virtus Polo Sedan, following a few simple steps: the warning light should be reset every 30,000 KM. The first thing to do is vehicle maintenance such as changing engine oil and filters; after performing the do-it-yourself service, we can get in the car, turn on the instrument panel and press and hold the button located under the speedometer on the left; keep this button pressed for a few seconds until the message with the wrench appears on the central display, now release the button and keep the button on the right pressed (00 / SET). To reset the oil change, press the key under the speedometer on the left twice and continue to hold down until the message with the wrench appears, now release the key and press the key only once; now press and hold the nearby key (00 / SET). Reset performed.


Posted on 14 September 2022 by ScegliAuto

Other guides that may interest you

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos