Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windscreen Washer Pump on a Volkswagen Golf TSI

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Pump

In this video tutorial, you will learn how to dismantle and replace the windscreen washer pump on a Volkswagen Golf TSI, following the instructions below. First, lift the vehicle and start by removing the front left wheel, driver's side; then use a T25 Torx spanner to unscrew the screws from the front wheel arch to remove it and access the washer pump, as shown in the video. At this point, disconnect the fluid hose, allowing it to drain into a container, and disconnect the electrical connector from the pump to remove and replace it with the new one!

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Below is the guide showing the procedure for removing and replacing the water pump on a Volkswagen Golf 1.4 TSI. First, open the bonnet of the vehicl…
Replacing the Windscreen Washer Fluid Reservoir of a Volkswagen Golf
Replacing the Windscreen Washer Fluid Reservoir of a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, we will discover the instructions that will allow you to remove and replace the windscreen washer fluid reservoir of a Volkswagen Golf. First,…
Replacing the Water Pump on Volkswagen Golf 1.4 TSI
Replacing the Water Pump on Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today's guide will illustrate the main steps on how to remove and replace the water pump on the Volkswagen Golf 1.4 TSI. First, open the vehicle's bo…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos