Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to activate and deactivate the volumetric alarm in the Volkswagen Golf

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years 2012-2019
Part: Key
Operation: How to activate and deactivate the volumetric alarm in the Volkswagen Golf

In this video tutorial you can see how you can activate and deactivate the volumetric alarm in the Volkswagen Golf, following a few simple steps that will guide you towards the correct management of your vehicle. All those who have the volumetric alarm installed in their car. If you close the car with the remote control and after thirty seconds the alarm with alarm is activated. After thirty seconds you can perform the function test of the alarm, then try to insert your hand inside the passenger compartment and you will trigger the audible alarm, now press the button on the remote control to turn off the volumetric alarm. Now you can deactivate the volumetric alarm on your Golf by double clicking on the remote control (door lock button). In this case, if you put your hand inside, the alarm will not sound, but if you open the door it will sound. You can also check the volumetric alarm by accessing the SETUP settings on your car radio.


Posted on 29 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Golf 2012-2019 - Why isn't the remote control of the Volkswagen Golf 7 working? Read Answer
    • Golf 2008-2012 - What does the ESP indicator light on the Volkswagen Golf 6 indicate? Read Answer
    • Golf 2003-2008 - Why is the remote control of the Volkswagen Golf 5 not working? Read Answer
    • Golf 2003-2008 - Why is the remote key for the Volkswagen Golf mk5 not working? Read Answer
    • Golf 1997-2003 - Why is the Volkswagen Golf remote control not working anymore? Read Answer
    • Golf 2003-2008 - Why doesn't the Volkswagen Golf 5 remote control work? Read Answer
    • Golf 2003-2008 - How do you synchronize the key with the central locking on the Volkswagen Golf 5? Read Answer
    • Golf 1997-2003 - How do you replace the battery in the Volkswagen Golf 4 key? Read Answer
    • Golf 2003-2008 - Why does the central locking on Volkswagen Golf 5 not work? Read Answer
    • Golf 2012-2019 - What to do when the Volkswagen Golf 7 key doesn't work? Read Answer
    • Golf 2003-2008 - How do you disassemble the ignition lock of the Volkswagen Golf 5? Read Answer
    • Golf 2003-2008 - Why doesn't the Volkswagen Golf 5 key work? Read Answer
    • Golf 2008-2012 - What to do if the Volkswagen Golf remote control does not work? Read Answer
    • Golf 2012-2019 - What causes the key malfunction in the Volskwagen Golf? Read Answer
    • Golf 2012-2019 - What to do if the Volkswagen Golf does not close? Read Answer
    • Golf 2012-2019 - What to do if I have problems with the Volkswagen Golf 7 remote control battery? Read Answer
    • Golf 2012-2019 - How long does the Volkswagen Golf remote control battery last? Read Answer
    • Golf 2003-2008 - What to do if the Volkswagen Golf Mk5 ignition lock is defective? Read Answer
    • Golf 2012-2019 - What to do if the Volkswagen Golf 7 key does not work? Read Answer
    • Golf 2003-2008 - Why does the Volkswagen Golf remote control no longer work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos