Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Alarm on a Volkswagen Golf 6

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

Let’s discover in this short video how to disable the alarm on the sixth series Volkswagen Golf, as well as the Passat B7. First, get into the vehicle and locate the button that allows you to deactivate the internal alarm system; it is located low on the driver’s side pillar, as shown in the video.

At this point, press the button to deactivate the alarm (the button will turn yellow); close the vehicle and check that it is functioning correctly.

Conversely, press the alarm button again (it will turn red) to reactivate it!


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to deactivate the alarm of the Volkswagen Golf?
How to deactivate the alarm of the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To deactivate the alarm of the Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this port is located at the bottom left of the d…
How to Activate and Deactivate the Volumetric Alarm on a Volkswagen Golf
How to Activate and Deactivate the Volumetric Alarm on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video tutorial, you can see how to activate and deactivate the volumetric alarm on a Volkswagen Golf, following a few simple steps that will …
How to deactivate the alarm on a Volkswagen Golf?
How to deactivate the alarm on a Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To deactivate the alarm on a Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this is located at the bottom left of the dashboar…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos