Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. New Beetle
  6. : How to replace the front window regulator on the Volkswagen New Beetle?

Volkswagen New Beetle - Video tutorial

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Side window
Operation: How to replace the front window regulator on the Volkswagen New Beetle?

In order to replace the front window lifter of the Volkswagen New Beetle you have to loosen the screws located under the molding of the handrail, so that the door panel can be completely removed. Next, you will have to unscrew the screws that secure the components inside the door and then those that secure the internal panel. When this has been removed, it will be possible to access the window regulator, which will have to be removed together with the relative glass, replacing them with new spare parts. After installation, all removed parts can be re-assembled.


Posted on 30 September 2022 by ScegliAuto



How to replace the window regulator mechanism of the Volkswagen New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) The instructions provided in this guide will show us how to disassemble and replace the window regulator mechanism of the Volkswagen New Beetle, in s
How do you replace the window regulator of a Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In order to replace the window regulator of the Volkswagen New Beetle, you need to loosen the two screws that secure the door panel at the bottom. By
How to replace the window regulator on the New Beetle convertible
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Replacing the window motor on a New Beetle? We remove the cover panel to access the window lifter motor. We unscrew the inside door handle after remo

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos