Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Monitoring System on the Volkswagen UP!

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

Video tutorial

First, you need to know the correct tyre pressure for your Volkswagen UP!. You can find this on the inner side of the driver's door, where the recommended values are listed, both for just the driver and when fully loaded, with values expressed in bar, PSI, and kPa (kiloPascal), which are three universally accepted units of measurement.

After checking the tyre pressures, to reset the warning light, turn on the ignition and press a button located inside the glove compartment (set). Hold it down until you hear a confirmation sound.

At this point, after driving at different speeds over a sufficient distance, the system will automatically memorise the new data.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volkswagen Up?
How to Reset the Service Light on a Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) In this tutorial, we will see how to reset the service light on a Volkswagen Up, a very simple and quick operation to perform only after completing a…
How to Reset the Service Light on Volkswagen Up?
How to Reset the Service Light on Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) In this tutorial, you will see how to reset the service light on a Volkswagen Up, a very simple and quick operation, to be performed only after compl…
How to Reset the Service Light on a Volkswagen Up
How to Reset the Service Light on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) In today's video, see how to reset the service light on a Volkswagen Up. Follow these steps: - switch off the vehicle; - locate the button on the ins…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos