Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Holder on the Volkswagen Golf 7

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
This video is currently unavailable

To replace the number plate holder on the Volkswagen Golf 7, first loosen the screws that secure the plate so that it can be completely removed. Once the plate is removed, you will have access to the old number plate holder located at the bottom, by removing its securing screws.

When the screws are loosened, you can completely remove the number plate holder and replace it with a new one. This should be installed and secured by inserting the screws into the appropriate holes; the procedure will be identical for both the front and rear.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Number Plate Holder on the Volkswagen Polo
How to Remove the Front Number Plate Holder on the Volkswagen Polo
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Removing the front number plate holder on your Volkswagen Polo (2018) is one of the simplest tasks you can perform at any time and completely indepen…
How do you replace the license plate light on the Volkswagen Golf 6?
How do you replace the license plate light on the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) It should be noted that the car shown in the video is a Volkswagen Golf 7, but the type of work illustrated and described involves the same operation…
Replacing Cabin Air Filter
Replacing Cabin Air Filter
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The cabin air filter housing is located on the passenger side, just below the glove compartment, near the scuff plate. Remove the plastic cover secur…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos