Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the radio on the Volkswagen Golf 7?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Warning light – error code

If there is no sound coming from the radio when you start the car, even though it is turned on and the touch controls are functioning, you can resolve this issue as follows: with the ignition on, press and hold the power button on the radio for at least ten to fifteen seconds, then release the button. The infotainment system will reset to its original settings, resolving the problem. Finally, test the system to ensure everything is working.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To reset a "composition media" radio in a Volkswagen, this video is demonstrated on a Volkswagen Golf, but it can be found in other Volkswagen group …
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Do you need to replace the radio in a Volkswagen Golf? Here's how to proceed. Turn off the radio, remove the trim using a lever, then use a screwdriv…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this brief guide, we will see the steps to reset the standard radio and multimedia system on the Volkswagen Golf. First, get in the vehicle and tu…

    Frequently Asked Questions

    • Golf 2012-2019 - What does the Volkswagen Golf error code P171900 indicate? Read answer
    • Golf 2008-2012 - Why did various fault indicators come on in the Volkswagen Golf after replacing the battery? Read answer
    • Golf 2019-2026 - How to reset the Volkswagen Golf Infotainment system? Read answer
    • Golf 2008-2012 - What does the fault code 00883 mean in the Volkswagen Golf? Read answer
    • Golf 2012-2019 - What does the Volkswagen Golf error P171900 mean? Read answer
    • Golf 2003-2008 - What does the Volkswgaen Golf 5 error code 00883 mean? Read answer
    • Golf 2003-2008 - What does "code safe 2" mean on the Volkswagen Golf 5? Read answer
    • Golf 1997-2003 - What does the DSG error message on the Volkswagen Golf Mk4 mean? Read answer
    • Golf 2012-2019 - What does the "EPC" light on a Volkswagen Golf mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos