Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs on a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the front headlamp bulbs on a Volkswagen Jetta, a very simple and quick task. First, ensure the key is not in the ignition, then open the bonnet and remove the large cap located at the rear of the headlamp.

Next, extract the old bulb by unlocking the corresponding metal clip, disconnect it from the power connector, and insert the replacement bulb. Avoid touching the new bulb directly with your bare hands; use gloves, as any residues can shorten its lifespan.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Volkswagen Jetta
How to Replace the Cabin Air Filter in a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) In today's video, you will see a very simple yet important maintenance task, especially if you drive a lot in the city. This guide shows how to repla…
How to Replace the Starter Motor on a Volkswagen Jetta?
How to Replace the Starter Motor on a Volkswagen Jetta?
Volkswagen Jetta (2005-2010 / MK 5, A5) In this tutorial, you will learn how to replace the starter motor on a Volkswagen Jetta, a straightforward task that requires good manual skills. Fir…
How to replace the timing belt on the Volkswagen Jetta?
How to replace the timing belt on the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the timing belt on the Volkswagen Jetta, lift the car so that the front right wheel is off the ground. Remove the wheel to access the inne…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos