Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil and Filter on a Volkswagen Routan

Model: Volkswagen Routan MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

Video tutorial

To change the oil and filter on the vehicle, follow these instructions: First, open the hood and unscrew the oil filler cap. Then, lift the vehicle and locate the oil drain plug under the oil pan. Loosen the bolt and place a container to collect the used oil. Wait a few minutes for all the oil to drain out, then tighten the plug again.

On the side of the oil pan, there is a filter that needs to be removed with the appropriate wrench and replaced with a new one, ensuring to replace the o-ring gasket as well.

Finally, return to the engine compartment, fill the system with new oil, and check the level with the dipstick.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

Volkswagen Routan (2009-2014 / MK 1) If you own a Volkswagen Routan and want to replace the cabin air filter yourself, just follow the steps outlined below. Before you start, make sure t…
Volkswagen Routan (2009-2014 / MK 1) The steps to reset the engine oil light on a Volkswagen Routan are quite simple. In the video, it is explained and shown what to do. Get in the vehic…
Volkswagen Routan (2009-2014 / MK 1) In this video tutorial, you can see how to reset the engine oil light on a Volkswagen Routan. The first step is to perform maintenance on the vehicle…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos