|
Do it yourself
| |||
| ||||
How to Reset the Engine Oil Light on a Volkswagen Routan
Model: Volkswagen Routan
MK 1
- Years:
2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
The steps to reset the engine oil light on a Volkswagen Routan are quite simple. In the video, it is explained and shown what to do. Get in the vehicle, insert the key into the ignition, and turn it to the first position to power on the instrument cluster without starting the engine. After about 10 seconds, you will see the "oil change" message flashing; press the accelerator pedal three times within 10 seconds. Turn off the instrument cluster and remove the key; reinsert the key and turn the instrument cluster back on to verify the operation was successful.
Updated on 10 June 2026 by ScegliAuto
Related tutorials
Volkswagen Routan
(2009-2014 /
MK 1)
You can completely clear the Service light displayed on the instrument panel of the Volkswagen Routan by inserting the ignition key into the ignition…
Volkswagen Routan
(2009-2014 /
MK 1)
You can clear the Service light on the Volkswagen Routan dashboard by inserting the ignition key into the ignition switch and turning it to the ON po…
Volkswagen Routan
(2009-2014 /
MK 1)
From the dashboard of the Volkswagen Routan, you can clear the Service light by inserting the ignition key into the ignition switch and turning it to…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.107
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |