Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob and Gaiter of the Volkswagen Passat

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Shift knob

In today’s video tutorial, you will see the steps to disassemble and replace the gear knob and gaiter of the Volkswagen Passat. First, get inside the vehicle and start detaching the gaiter from the bottom; then, unclip and remove the small metal clip found between the gaiter and the knob, pulling the knob upwards to detach and remove it, as shown in the video. At this point, also remove the gaiter, then replace your components; reassemble everything by following the reverse procedure!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob Gaiter on a Volkswagen Passat?
How to Replace the Gear Knob Gaiter on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To replace the gear knob gaiter on a Volkswagen Passat, open the glove compartment located in front of the gear lever to detach the lower part at the…
Replace the Gear Knob on Your Volkswagen Passat
Replace the Gear Knob on Your Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Want to replace the gear knob on your Volkswagen Passat? Here’s how to do it: Use a plastic trim tool to detach the leather gaiter trim, then grasp t…
Guide to Replacing the Gear Knob Gaiter
Guide to Replacing the Gear Knob Gaiter
Volkswagen Passat (1996-2005 / 3BG, B5) The gear knob gaiter of a car is an element that wears out easily as the lever is constantly in motion. You can change the cover by following this gu…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos