Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Hatch Lock of a Volkswagen Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

The video is a simple guide illustrating the steps necessary to replace the rear hatch lock of a Volkswagen Golf 5. First, open the rear hatch and remove the screws from the area inside the handles. Next, gently lower the plastic cover and then remove the connector by applying slight pressure on the appropriate lever.

Additionally, remove the hatch lock piece and replace it with the new one. Finally, it will be necessary to re-screw the screws back in place, and the replacement will be complete. The video also illustrates the internal part of the lock piece removed from the car to investigate the underlying problem causing the malfunction.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Rear Lock Actuator on the Volkswagen Golf
Removal and Replacement of the Rear Lock Actuator on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this brief guide, follow the main instructions to remove and replace the rear lock actuator on the Volkswagen Golf. First, open the boot and start…
How to Remove the Rear Door Lock on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this brief guide, follow the steps to remove and replace the rear door lock module on a Volkswagen Golf. First, open the rear door of the vehicle …
Replacing the Handle and Lock of the Volkswagen Golf Tailgate
Replacing the Handle and Lock of the Volkswagen Golf Tailgate
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will go through the step-by-step instructions to remove and replace the handle and lock of the tailgate of the Volkswagen Golf, in simple s…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos