Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Volkswagen Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Battery

See other generations:
Video tutorial

If you need to replace the battery in your vehicle, follow the instructions below. Open the bonnet and locate the battery box on the left side behind the headlamp.

Remove the cover first and then unscrew the screws on the sides that hold the casing. Next, disconnect the negative terminal followed by the positive terminal.

Pull the battery out of its housing and position the new one. Reconnect the positive terminal first and then the negative terminal, and refit the side casing and the top cover.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Volkswagen New Beetle
How to Replace the Battery in a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To replace the battery in a Volkswagen New Beetle, open the bonnet to access the components inside the engine bay: on the right side, near the left h…
How to Replace the Battery on the Volkswagen New Beetle
How to Replace the Battery on the Volkswagen New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) If you need to replace the battery in your vehicle because it has run flat, the following text and video will provide all the useful instructions and…
How to Replace the Battery of a VW New Beetle
How to Replace the Battery of a VW New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) How do you replace the battery in your New Beetle? This video explains the procedure. Open the car door and pull up the engine compartment release le…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos