Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Shock Absorber Replacement

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Suspension system

See other generations:
Video tutorial

To replace the front shock absorbers, you first need appropriate spring compressors to compress the springs and remove the shock absorber mount. Lift the vehicle onto a hydraulic lift and remove the front wheel.

Then disconnect the drop link and the brake sensor cable. Remove the mounting bolts securing the shock absorber to the hub mount and extract it, possibly using a hammer.

Access the engine bay to remove the nut securing the mount from the strut top. Compress the spring to remove the upper mount from the strut and slide off the dust cover. Fit the dust cover and spring onto the new shock absorber, compress the spring, and secure the mount to the strut.

Reverse the steps for installation back onto the vehicle.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Replacing the Boot Gas Struts in a Volkswagen Golf Mk4
Replacing the Boot Gas Struts in a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, you will learn how to replace the gas struts of the boot lid in a Volkswagen Golf Mk4. First, open the boot lid and use a screwdriver …
Replacing Car Shock Absorbers
Replacing Car Shock Absorbers
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The following guide shows how to change the shock absorbers on your car simply and practically, without needing the help of a mechanic. Typically, sh…
How to Replace the Front Shock Absorbers on a Volkswagen Golf
How to Replace the Front Shock Absorbers on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Replace the front shock absorbers on a Volkswagen Golf 7 using this video tutorial. The first step, after safely parking the car, is to remove the wi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos