Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Brake Pads and Discs

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Brake pads

See other generations:
Video tutorial

This guide illustrates all the operations from removing the wheel to checking the wear of the pads, then proceeding to remove the caliper, from which the pads are extracted. At this point, unscrew the bolts that hold the brake disc in place from the inside for a condition check, then move on to reassembly.

Reattach the brake wear sensor, refit the wheel, and to ensure the system returns to efficiency, press the brake pedal several times. Now your brakes are as good as new!


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (1996-2005 / 3BG, B5) This guide shows how to change the brake pads on your car quickly and easily. Replacing the brake pads is crucial for the safety of passengers. Lift …
Volkswagen Passat (2010-2014 / B7) The following steps will guide you on how to remove and replace the rear brake pads on a Volkswagen Passat. First, lift the vehicle and start by remo…
Volkswagen Passat (2005-2010 / B6, 3C) Are the rear brake pads worn? Here’s how to replace them inside the brake caliper. Lift the car on a jack, then remove the wheel (using a socket wren…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos